APPROVED DOCUMENT K

 0    58 informačný list    sim
stiahnuť mp3 vytlačiť hrať Skontrolujte sa
 
otázka Odpoveď
approved
What is a approved Document?
začať sa učiť
zatwierdzony
Building Regulations
začať sa učiť
Przepisy budowlane
protection from impact
Protection from falling, collision and impact
začať sa učiť
Ochrona przed uderzeniami
impact
The definition of impact is one thing crashing into or having an affect on another.
začať sa učiť
wpływ / zderzenie
ladder
začať sa učiť
drabina
loading bays
začať sa učiť
strefa załadunku
Vehicle barriers
začať sa učiť
Bariery pojazdów
glazing
začať sa učiť
szyby
provisions
Additional provisions for glazing in buildings other than dwellings.
začať sa učiť
Przepisy
dwellings
Additional provisions for glazing in buildings other than dwellings.
začať sa učiť
mieszkaniowe
trapping by doors
trap.
začať sa učiť
uwięzienie przez drzwi
pułapka
compliance with the law
začať sa učiť
zgodność z prawem
workmanship
začať sa učiť
jakość wykonania
Handrail
začať sa učiť
Poręcz
helical stair
helical stair = spiral stair
začať sa učiť
spiralny schody
noising
začať sa učiť
nosek schodów
stair tread
začať sa učiť
stopnica
pitch
začať sa učiť
kąt nachylenia
rise
začať sa učiť
wysokość stopnia
riser
začať sa učiť
wysokość stopnia
landing
The width and length of every landing should be at least as great as the smallest width of the flight. (minimum 1 m)
začať sa učiť
podest / spocznik
staircase
začať sa učiť
klatka schodowa
stair enclosure
začať sa učiť
klatka schodowa
flight of stairs
začať sa učiť
bieg schodów
straight flight stairs
začať sa učiť
Schody jednobiegowe proste
dog-legged stairs
začať sa učiť
Schody dwubiegunowe proste
winding stairs
začať sa učiť
kręte schody
cantiliver stairs
začať sa učiť
schody wspornikowe
timber stairs
začať sa učiť
Schody z drewna
going
going = tread
začať sa učiť
stopnica
RISER in PRIVATE STAIRS
Rise maximum 220mm. RISE = 150mm- 220mm.
začať sa učiť
wysokość stopnia
H = 150mm-220mm
GOING in PRIVATE STAIRS
GOING minimum 220mm. GOING = 220mm- 300mm.
začať sa učiť
SZEROKOŚĆ STOPNIA
intended
Private: intended to be used for only one dwelling.
začať sa učiť
przeznaczony
assembly
Institutional and assembly: Serving a place where many people gather.
začať sa učiť
zgromadzenie
gather
Institutional and assembly: Serving a place where many people gather.
začať sa učiť
zbierać
headroom
Minimum headroom= 2m.
začať sa učiť
wysokość prześwitu
Institutional and assembly stairs
Maximum rise = 180mm. Minimum going 280.(If the area of a floor of the building is less than 100m2, the going may be reduced to 250mm.)
začať sa učiť
Instytucjonalne i zbiorowe schody
Pitch
the maximum pitch for private stair is 42°.
začať sa učiť
kąt nachylenia
gangway for seated spectators
The maximum pitch for gangways for seated spectators is 35°.
začať sa učiť
Przejście na siedzących widzów
escalator
začať sa učiť
schody ruchome
stair well
začať sa učiť
dusza schodów
fire escape stairs
začať sa učiť
schody ewakuacyjne
dividing flights
A stair in a public building which is wider than 1800mm should be divided into flights which are not wider than 1800mm.
začať sa učiť
podzielenie biegu
length of flights
The number of risers in a flight should be limited to 16 if a stair serves an area used as a shop or for assembly purposes.
začať sa učiť
długość biegu
lending next to doors
at least 400mm.
začať sa učiť
spocznik obok drzwi
cupboard
at least 400mm.
začať sa učiť
szafka nad spocznikiem
alternating tread stair
začať sa učiť
zmienny stopień
walkways
začať sa učiť
chodniki
Handrails for stairs
In all buildings hadrail height should be between 900mm and 1000mm measured to the top of the handrail from the pitch line or floor.
začať sa učiť
Poręcze na schodach
guarding
Flights and landings shoul be guarded at the sides (in dewellings) when there is a drop of more than 600mm.
začať sa učiť
osłona / ochrona
drop
začať sa učiť
spadek
guarding
Single family dwellings:1. Stairs, landings, ramps, edges of internal floors. H= 900mm. 2. External balconies and edges of roof. H= 1100mm.
začať sa učiť
osłona / ochrona
suitable handrails for common stairs
Flights and landings should be guarded at the sides to a height of 900mm. The construction should be that children will not readily be able to climb the guarding and a 100mm ball cannot pass through any openings in the guarding.
začať sa učiť
odpowiednie porecze dla powszechnych schodów poręcze
formula
The normal relationship between the dimensions of the rise and going is that twice the rise plus the going (2R+G) should be between 550mm and 700mm.
začať sa učiť
wzór
2R+G = 550mm -700mm
readily
Flights and landings should be guarded at the sides to a height of 900mm. The construction should be that children will not readily be able to climb the guarding and a 100mm ball cannot pass through any openings in the guarding.
začať sa učiť
łatwo
Utility stair
začať sa učiť
schody użyteczności publicznej
external stairs
For dwellings, for external tapered stairs that are part of the buildings, the going should be a minimum of 280mm.
začať sa učiť
schody zewnętrzne
Width of STAIRS
minimum width of 900mm. Landings should be at least the width and length of the minimum width of the fight. For buildings other than dwellings, each landing should have an unobstructed length of at least 1,200m.
začať sa učiť
Szerokość schodów

Ak chcete pridať komentár, musíte byť prihlásený.